Sample Preparation Equipment
Absorbing Pads & Sample Prep Accessories
Liquid absorbing pads are used to weigh non-volatile liquid samples using pressed tin or silver capsules. Type N is suitable for CHN and type O for CHN, Sulfur and Oxygen (elemental) analysis. Simply insert into the bottom of the capsule and dispense the appropriate volume of sample onto the pad using a micro-syringe or micro-pipette. Two or more pads can be used for larger samples. Liquid absorbing pads are pre-treated for low blank values.
Shop By
-
Maxima Micro-Drill Reducing Collet 3.0mm to 0.4mm RM-3004 N20330.001E Product No: N20330.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 0.7mm RM-3007 N20333.001E Product No: N20333.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 0.8mm RM-3008 N20334.001E Product No: N20334.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 1.3mm RM-3013 N20339.001E Product No: N20339.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 1.4mm RM-3014 N20340.001E Product No: N20340.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 1.5mm RM-3015 N20341.001E Product No: N20341.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 1.6mm RM-3016 N20342.001E Product No: N20342.001E
-
Cutting Wheel, diamond, 22mm OD with 3.175mm mandrel N25010.001E Product No: N25010.001E
-
Spherical Burr, carbide, 6.0 x 3.0 x 44mm N26028.001E Product No: N26028.001E
-
Maxima Micro-Drill Handpiece, 35,000rpm, with 2.35mm Collet N20100.001E Product No: N20100.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 0.6mm RM-3006 N20332.001E Product No: N20332.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 0.9mm RM-3009 N20335.001E Product No: N20335.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 1.0mm RM-3010 N20336.001E Product No: N20336.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 1.7mm RM-3017 N20343.001E Product No: N20343.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 1.9mm RM-3019 N20345.001E Product No: N20345.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 2.0mm RM-3020 N20346.001E Product No: N20346.001E
-
Maxima Micro-Drill Reducing Collet 3.175mm to 1.6mm RM-3216 N20360.001E Product No: N20360.001E
-
Maxima Micro-Drill Reducing Collet 3.175mm to 2.35mm RM-3224 N20361.001E Product No: N20361.001E
-
Maxima Micro-Drill Reducing Collet 2.35mm to 1.6mm RM-2416 N20370.001E Product No: N20370.001E
-
Fibre Washer, diamond cutting wheel, 5.5 x 1.6 x 1mm N25025.010P Product No: N25025.010P
-
Spherical Burr, carbide, 1.4 x 2.381 x 44mm N26014.001E Product No: N26014.001E
-
Spherical Burr, carbide, 1.4 x 3.0 x 44mm N26016.001E Product No: N26016.001E
-
Spherical Burr, carbide, 1.8 x 3.0 x 44mm N26018.001E Product No: N26018.001E
-
Spherical Burr, carbide, 1.83 x 2.381 x 44mm N26020.001E Product No: N26020.001E
-
Spherical Burr, carbide, 4.7 x 3.0 x 38mm N26026.001E Product No: N26026.001E
-
Spherical Burr, carbide,6.35 x 3.175 x 44mm N26030.001E Product No: N26030.001E
-
Maxima Micro-Drill Foot Rheostat TPF-77 N20120.001E Product No: N20120.001E
-
Maxima Micro-Drill Collet Wrench TPH65-175 N20150.001E Product No: N20150.001E
-
Maxima Micro-Drill Joint Shaft PHP35-5-121 N20170.001E Product No: N20170.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 0.5mm RM-3005 N20331.001E Product No: N20331.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 1.1mm RM-3011 N20337.001E Product No: N20337.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 1.2mm RM-3012 N20338.001E Product No: N20338.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 1.8mm RM-3018 N20344.001E Product No: N20344.001E
-
Maxima Micro-Drill Reducing Collet 3.0mm to 2.35mm RM-3024 N20349.001E Product No: N20349.001E
-
Spherical Burr, carbide, 0.79 x 2.381 x 44mm N26010.001E Product No: N26010.001E
-
Spherical Burr, carbide, 1.0 x 3.0 x 44mm N26012.001E Product No: N26012.001E