Sample Preparation Equipment
Absorbing Pads & Sample Prep Accessories
Liquid absorbing pads are used to weigh non-volatile liquid samples using pressed tin or silver capsules. Type N is suitable for CHN and type O for CHN, Sulfur and Oxygen (elemental) analysis. Simply insert into the bottom of the capsule and dispense the appropriate volume of sample onto the pad using a micro-syringe or micro-pipette. Two or more pads can be used for larger samples. Liquid absorbing pads are pre-treated for low blank values.
Shop By
-
Maxima Micro-Drill Chuck Joint Wrench TPH65-176 N20160.001E Product No: N20160.001E -
Maxima Micro-Drill 3.0mm Collet Chuck TPH65-117B N20310.001E Product No: N20310.001E -
Maxima Micro-Drill 3.175mm Collet Chuck TPH65-117C N20320.001E Product No: N20320.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 0.4mm RM-3004 N20330.001E Product No: N20330.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 0.7mm RM-3007 N20333.001E Product No: N20333.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 0.8mm RM-3008 N20334.001E Product No: N20334.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 1.3mm RM-3013 N20339.001E Product No: N20339.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 1.4mm RM-3014 N20340.001E Product No: N20340.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 1.5mm RM-3015 N20341.001E Product No: N20341.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 1.6mm RM-3016 N20342.001E Product No: N20342.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 0.6mm RM-3006 N20332.001E Product No: N20332.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 0.9mm RM-3009 N20335.001E Product No: N20335.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 1.0mm RM-3010 N20336.001E Product No: N20336.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 1.7mm RM-3017 N20343.001E Product No: N20343.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 1.9mm RM-3019 N20345.001E Product No: N20345.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 2.0mm RM-3020 N20346.001E Product No: N20346.001E -
Maxima Micro-Drill Reducing Collet 3.175mm to 1.6mm RM-3216 N20360.001E Product No: N20360.001E -
Maxima Micro-Drill Reducing Collet 3.175mm to 2.35mm RM-3224 N20361.001E Product No: N20361.001E -
Fibre Washer, diamond cutting wheel, 5.5 x 1.6 x 1mm N25025.010P Product No: N25025.010P -
Maxima Micro-Drill Foot Rheostat TPF-77 N20120.001E Product No: N20120.001E -
Maxima Micro-Drill Collet Wrench TPH65-175 N20150.001E Product No: N20150.001E -
Maxima Micro-Drill Joint Shaft PHP35-5-121 N20170.001E Product No: N20170.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 0.5mm RM-3005 N20331.001E Product No: N20331.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 1.1mm RM-3011 N20337.001E Product No: N20337.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 1.2mm RM-3012 N20338.001E Product No: N20338.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 1.8mm RM-3018 N20344.001E Product No: N20344.001E -
Maxima Micro-Drill Reducing Collet 3.0mm to 2.35mm RM-3024 N20349.001E Product No: N20349.001E -
Micropipetting Aid M41100.001E Product No: M41100.001E -
Micropipettes, 2ul, end/end filling, 29mm length, with aid M41102.250P Product No: M41102.250P -
Micropipettes, 5ul, calibrated 1ul, 125mm length M41205.250P Product No: M41205.250P -
Micropipettes, 1ul, end/end filling, 29mm length, with aid M41101.250P Product No: M41101.250P -
Micropipettes, 5ul, end/end filling, 29mm length, with aid M41105.250P Product No: M41105.250P -
Micro-Spatula, LH cranked spoon, 4x6mm, hex handle, 170mm M11116.001E Product No: M11116.001EAvailability: Ships in 5–7 business days -
Micro-Spatula, straight spoon, 5x8mm, hex handle, 190mm M11122.001E Product No: M11122.001E -
Forceps, straight pointed end, 130mm M11220.001E Product No: M11220.001E -
Forceps, curved pointed end, 130mm M11230.001E Product No: M11230.001E